Log in
English – Global
AU-002
- Network Speaker Driver
- Support SIP and UDP Broadcast Protocol
- Build in 20W Power Amplifier to Drive Speaker Directly
- Powered from the IP Network Cable Using PoE+ IEEE 802.3at
- Remote Configuration and Firmware Upgrade by HTTPS
- Warranty might vary by territory or situation. Please check: VIVOTEK Warranty
Product Specification
Product Information
Rated Impedance
Lower to 3 ohm speaker totally(Driver)
Max. Power Consumption
20 W
Microphone
100Hz-16KHz Single point, SPL-44 ± 2db AT 2 KΩ
Network
SIP Support
RFC 3261(SIP base standard)
Interface
WAN: RJ-45x1, 10/100Mbps Fast Ethernet port
Supported Protocols
SIP, IPv4/v6, RIPv2 / OSPF, HTTPS, QoS DSCP, FTP, TFTP, SNMP v2c / v3, SNMP, IGMP, DHCP, SSHv2, PIM- DVMRP, RMON
Audio Codec
G.711 a/uLaw, G.726, G.722, G.729, iLBC, L16
Support Function
Auto provision, Audio tone testing, System log
Security
Password protection, IP address filter, user access log, authentication
VSS Integration
Broadcasting
Supported
Automatic Trigger Audio Clips
Supported
General
Casing
Plastic
Power
PoE+ (Power over Ethernet), IEEE 802.3at
Operating Temperature
-35°C ~ 60°C (-31°F ~ 140°F)
Dimensions
110 x 85 x 25 mm
Weight
115 g
Certifications
CE, FCC, LVD EN62368-1
LED Luminous
3x LED display status
Material
Plastic
